In the same way as traditional bicycles, electric bikes require proper maintenance to ensure a safe and long-lasting ride. As we all know, it is important to turn off your e-bike before servicing or maintaining, and inspecting each part of the components. If your electric bicycle is on, it may lead to injuries and accidents.
How to clean the frame?
Keeping your e-bike clean is not only good for the appearance, protecting the frame and components from damage to extend the life span. It can also make your e-bike more efficient and provides you with a better riding experience.
The best way to clean your e-bike is to wipe it gently and softly - wipe it down with a soft rag or microfiber cloth after each ride. In addition to wiping, you can use a mild detergent (soap liquid or bicycle-specific cleaner) to carry out a deeper clean, but always make sure your e-bike is turned off.
When cleaning, please make sure to avoid using harsh chemicals that can damage the e-bike frame, for example, disc brakes - ingredients in cleaning products may damage them. If stubborn dirt or grime on the bike, use a soft brush to remove it and wipe it clean with a dry cloth.
How to protect the battery life?
Since the battery plays an important role in e-bikes, maximizing their life and efficiency is the goal. Most electric bikes use lithium-ion batteries. While lighter, charge faster and last longer than conventional batteries, they degrade over time.
One cycle is when the battery goes from 0% to 100%, and most electric bike batteries can last between 500 and 1000 charge cycles. Therefore, the most effective way to extend the life of a lithium battery is to charge it whenever you get the chance. In addition, keeping lower assistance levels will slow down the power consumption.
Although the e-bike is waterproof - the motor, battery, and cables are covered to prevent water and damage. However, this does not mean that e-bikes can be submerged in water or sprayed with a pressure washer because it is possible for water to seep in through cracks that you are not aware of.
How to maintain the brakes?
E-bikes ride faster than most traditional bikes, but they are also heavier. As a result, brakes tend to be used more and wear out faster due to a large amount of braking force required.
Most electric bikes have disc brakes with calipers mounted on the forks and frames around the rear wheel. When you squeeze the brakes levels, the brake pads squeeze the brake discs, also called brake rotors. Friction will slow the bike down. As a result, it is vital to check the brake pads for wear and tear. You will notice that it gets thinner and thinner as time goes on. Eventually, they will need to be replaced.
How to take care of the tires?
Properly inflated tires that can withstand the weight of your e-bike are essential. And the tire pressure of your e-bike depends on what terrain you ride on.
If you're riding on the road, make sure your tire pressure is between 90 and 120 PSI. For mountain bikes, keep them between 25 and 35 PSI. If you plan on riding on a different type of terrain, 50 to 70 PSI is perfect.
In addition to tire pressure, make sure your e-bike has a good traction and can resist being punctured. Before getting on your bike, make sure the tires are free of glass and debris. Things can get stuck in the tire, which can cause a blowout.
All in all, proper care will ensure that your e-bike is reliable and performs well. With regular maintenance before and after each ride and a good maintenance schedule, your e-bike will last longer and stay in good condition. And the reliable e-bike suppliers are also a key factor in ensuring safe riding in the long run. Saneagle is a professional electric bicycle manufacturer in China, offering a wide range of high-performance electric bikes at affordable prices. If you want more information about our products, please feel free to contact us!